Schneider MiCOM Numerical Relays

Schneider Micom P127 relay is a directional and non-directional overcurrent relay,  multifunctional three-phase P127 numerical relay with voltage protection functions. 

MiCOM P127 is housed in a compact 4U case in 20TE or 30TE widths, Schneider P127 Relay is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

MiCOM P127 devices also include a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

Schneider Micom P111 Relay is suitable for all applications requiring over-current and/or earth-fault protection.
Due to its cost effectiveness and technical features, the MiCOM P111 relays can be used in both medium and low -voltage applications. Their user-friendly design provides a full set of easily accessible measurements.
MiCOM P111 can be used where communication facilities are required and their many features allow for easy adaptation to different applications and operational conditions.

MiCOM S1 setting software enables easy configuration and access to all measurements. In addition, MODBUS RTU communication protocol allows interfacing with substation control or the SCADA system. MiCOM P111 is housed in a small case for rail or rack mounting.
Cost competitive features enable full measurements
MiCOM P111 provides flexible current relay, a full set of measurements and a wide range of efficient features at a competitive price.

APPLICATION of MiCOM P111 relays
The MiCOM P111 provides a wide range of
protection functions.

Typical applications are:

• Underground MV cables
• Insulated or resistance earthed neutral systems
• MV subscribers, Industry, Transport
• Advanced LV application (specifically where communication facilities are required)

To have good ratio: price to functionality used in the application, there are different models of P111 overcurrent relay

available.

GLOBAL FUNCTIONS

• Operate in 1, 2, or 3-phase arrangement (the missing phase is not connected)
• Two setting groups, selected from the relay menu, binary input or system
• 35 mm DIN rail or flush mounted case (option)
• True RMS phase current value measurement within a frequency range from 10Hz to 1000Hz
• Earthfault current value measurement within a frequency range from 40Hz to 70Hz
• 4 digit LED display
• 5 button keypad to input settings and configure the relay
• Fault record for the 3 most recent trips

Our catalog of Schneider Micom Protection Relays provides leading and reliable protection and control for any network application. The latest Protection Relays also offer comprehensive security and dependability for your electrical grid, from overcurrent and arc protection to distance and differential protection of the transmission line. Our product range offers solid protection with advanced communications such as the IEC 61850 to give you peace of mind in protecting your grid. Contact us to get Micom P111 price!

Schneider Micom P122 relay is a part of MiCOM P12x range of directional and non-directional overcurrent relays from single phase or earth fault up to the multifunctional three-phase P127 device with voltage protection functions. Models available: MiCOM P120, MiCOM P121, MiCOM P122, MiCOM P123, MiCOM P125, MiCOM P126, MiCOM P127
MiCOM P122 numerical relay is housed in a compact 4U case in 20TE or 30TE widths, MiCOM P12x is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

Micom P122 Numerical Relay also includes a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

The MiCOM P63x series differential protection devices are designed for fast, selective, short-circuit protection of transformers, motors, generators and other installations.

Providing quick and selective differential protection, the MiCOM 63x is easily interfaced to almost any kind of substation control or SCADA system. It is user-friendly and provides clear readings from extensive recordings.

High-speed, three-system differential protection

MiCOM P63x provides high-speed three-system differential protection using a triple-slope characteristic and two high-set differential elements in combination with transformer inrush restraint, over fluxing restraint and through-stabilization.

By entering the nominal values of transformer windings and associated CTs, users obtain amplitude and vector group matching. The devices also incorporate many supplementary protective functions. MiCOM P63x provides four setting groups for easy adaptation to varying system operation conditions.

Systems versatility and easy, clear readings

Equipped with 1A/5A setting software, MiCOM P63x has two communication interfaces for SCADA and RTU, and numerous communication protocols. It allows easy and complete device settings and readings from extensive recordings. Available for flush or wall mounting, MiCOM P63x benefits from InterMiCOM interfacing for direct end-end communication between two protection devices.

MiCOM P12x is housed in a compact 4U case in 20TE or 30TE widths, MiCOM P12x is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

MiCOM P12x devices also include a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

MiCOM P9xx series of voltage and frequency relays are capable of highly versatile applications and are easily integrated into both new and existing network control systems. They offer improved power quality and are an ideal cost effective solution for maintaining system stability.

Versatile applications and enhanced techniques
Their application versatility and association of protection functions with automation, control and measurement make MiCOM P9xx an optimal, innovative solution for ensuring power system stability and maintenance reduction.

By employing enhanced techniques, designed to operate under non-linear abnormalities and sub-oscillations, MiCOM P9xx eliminates the risk of unwanted operations. With up to 30 output contacts, users can create simple or complex load and generation management schemes using the relay's logic capabilities.

Integrated restoration facilities ensure that any disconnected loads are reconnected as soon as possible after system recovery. Industry standard communication protocols permit easier integration into both new and existing network control systems.

Easergy MiCOM P132 offers a flexible and powerful device housed in a 4U case in 24TE, 40TE or 84TE width.  It provides a scalable solution to your needs, for hardware and software. Also includes optional detachable HMI for improved security and safety. Easergy MiCOM P132 offers Bay Control for up to 3 devices and a library of 80 pre-engineered templates to reduce engineering time.
Information exchange is performed by inbuilt communication interfaces, using either serial protocols (IEC 60870-5-101, -103, Courier, DNP or Modbus) or an Ethernet interface using IEC 61850.

In 40TE or 84TE, 4U case sizes, Easergy MiCOM P139 One-Box solution is the most advanced in the range, adding further protection functionality with a graphic LCD display and Bay Control for up to 10 devices, using a pre-engineered library of up to 300 templates.

MiCOM P130C offers a compact case feeder management device with configurable function keys, 17 LED indicators and communication functionality.

Scalable solutions for advanced feeder protection and control

• Comprehensive and advanced range of protection functions, standardized, yet scalable to meet many system requirements.
• Flexible case mounting options suitable for wall, flush/panel or rack mounting.
• Modular hardware options for simple adaptation to any specific application requirements
• Advanced One-Box Solution and Bay Control 
• Detachable HMI for increased security and safety
• Available with IEC 61850 Communication (P132, P139)

Multifunctional feeder management relay enables the user to cover a wide range of applications in the protection of:

• Cables
• Overhead lines
• Transformers
• Motors

Schneider Micom P123 Numerical relay is part of MiCOM P12x,  a range of directional and non-directional overcurrent relays from single phase or earth fault up to the multifunctional three-phase P127 device with voltage protection functions. Models available: MiCOM P120, MiCOM P121, MiCOM P122, MiCOM P123, MiCOM P125, MiCOM P126, MiCOM P127

MiCOM P123 is housed in a compact 4U case in 20TE or 30TE widths, MiCOM P12x is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

MiCOM P123 Numerical relay also includes a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

 Discover our catalog of Schneider Micom Protection Relays.

Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. They include Overcurrent, Earth/Ground Fault and complete protection, advanced communication and integrated functions for feeders. Easergy MiCOM P14x protection relays also offer function keys for integral scheme control functionality.

The following models are available:

• Easergy MiCOM P141 – Feeder management relay
• Easergy MiCOM P142 – Feeder management with integrated Autoreclose
• Easergy MiCOM P143 – Feeder management, integrated Autoreclose and Check Synchronism
• Easergy MiCOM P145 – Feeder management, Autoreclose, Check Synchronism and Enhanced operator control functions

Housed in standard MiCOM 40TE, 60TE or 80TE, 4U case sizes, Easergy MiCOM relays offers a complete and scalable range of feeder protection, serial and Ethernet communications, including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese.

Easergy Micom P547 provides optimum protection for EHV and HV lines. With it fast fault clearance times, no external signaling and fully integrated back-up protection functions, it is a cost-effective and highly dependable protection solution.

Simple scheme, additional voltage inputs, fully-integrated back-up protection
Easergy Micom P547's simple protection principle and scheme enables fast fault clearance time. Interfacing with the Power Line Carrier equipment, which operates via the power line, means that the end-to-end scheme communication requires no external signaling channel.

VT inputs may be added to enhance protection stability and sensitivity in long line applications, and where single pole tripping is required. Adding voltage inputs supports distance protection and fault location, and enhances other Easergy Micom P547 functions.

Easergy Micom P547 is equipped with a complete range of fully integrated back-up protection, thereby improving reliability. It also includes sub-cycle distance elements so Easergy Micom P547 can be used in phase comparison scheme applications, for distance applications, or both simultaneously.

Fast fault clearance and no external signaling for cost-effective protection

Easergy Micom P547 provides highly selective unit protection and fast fault clearance times. The power line itself is the signaling medium, and users are not required to depend on VT signals for tripping. Equipped with back-up overcurrent protection, Easergy Micom P547 is a cost-effective alternative to current differential.

Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. They include Overcurrent, Earth/Ground Fault and complete protection, advanced communication and integrated functions for feeders. Easergy MiCOM P14x protection relays also offer function keys for integral scheme control functionality.

The following models are available:

• Easergy MiCOM P141 – Feeder management relay
• Easergy MiCOM P142 – Feeder management with integrated Autoreclose
• Easergy MiCOM P143 – Feeder management, integrated Autoreclose and Check Synchronism
• Easergy MiCOM P145 – Feeder management, Autoreclose, Check Synchronism and Enhanced operator control functions

Housed in standard MiCOM 40TE, 60TE or 80TE, 4U case sizes, Easergy MiCOM relays offers a complete and scalable range of feeder protection, serial and Ethernet communications, including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese.

Easergy MiCOM P746 has proven techniques and dynamic topology processing algorithms, offer a combination of security, speed and sensitivity.

Simple configuration for centralized architecture

The Easergy MiCOM P746 differential busbar protection provides a centralized one box or three boxes architecture and is very simple to use:

It does not need to be deeply engineered and supports easy operation and maintenance of the busbar.

Fast, secure and easy to use

With a typical operating time of 15 ms with High Break High Speed contact option or 19ms with standard contacts, the Easergy MiCOM P746protection is one of the fastest in its class.

Moreover, the trips can be synchronous or sequential, dynamically changing substation topology of the busbar is displayed on any PC with the substation real time dynamic monitoring tool.

Fully communicant

With IEC61850-8.1 Edition 1 or Edition 2, Courier, DNP3.0, Modbus and IEC103 protocols, the Easergy MiCOM P746 is easily integrated in any substation system.


Latest communication protocols Ethernet Redundancy

Fully Equipped with the latest communications protocols (IEC61850 Ed1 Ed2 available in the same device, selection by setting).
Maximum availability and reliability of Ethernet communications thanks to the implementation of PRP/HSR standard redundancy protocols with an instantaneous recovery time (0 ms) in case of network failure.
Dual IP address allows the device to be connected to 2 independent communication networks (e.g, SCADA system network Maintenance network)
Universal IRIG-B input (automatically detects modulated or unmodulated signal)

Major enhancement to Cybersecurity

Operational Cyber Security, compliant to IEC 62351, helps protect installations with security based on embedded features such as Role Based Access Control (RBAC), Port Hardening, Security Logs and Access Traceability. The IED by default includes RBAC with different users defined and a Security Administrator.

Easergy MiCOM P746 REMOTE HMI PC APPLICATION SOFTWARE (Included in MiCOM S1 Studio User Software)
The Easergy MiCOM P746 remote PC HMI allows the user to display the Easergy MiCOM P746 Busbar topology, associated measured analogue quantities and DDB (digital data bus) status information such as circuit breaker and isolator positions and alarms.

• Fast fault trip, Synchronous or Sequential trip
• Adapted to simple busbar configurations
• Can operate with different types of CT

Easergy Micom P138, with a proven record of providing comprehensive, efficient protection, can be applied to a wide range of applications. A user-friendly interface and several communication ports allows simple configuration. Highly flexible, Easergy Micom P138 can be customized to the user’s specific requirements.

Independent setting groups and simplified configuration
The Easergy Micom P138 enables a wide range of applications to protect supplies and catenaries in classic and autotransformer-fed (AT) systems. With easy connection to virtually all substation and catenary network management systems, it is enhanced by a complete range of backup protection and automation functions.

Four independent setting groups, with user-friendly control interface, store protection parameters and enable simple configuration to different operating conditions or alternative feeding. Extensive polling of information is also possible.

Easergy Micom P138 also features InterMiCOM teleprotection. Available in a modular design, it can be rack, flush panel or wall surface-mounted.

Flexibility and easy integration
User-friendly Easergy Micom P138is fitted with 1A/5A software setting, both supported in a single device, and two remote communication interfaces. It also benefits from InterMiCOM teleprotection interface. Users can customize the Easergy Micom P138 to their own applications, and its flexibility enables easy integration into various substation protective schemes.

• MV Industry, Transport
• Advanced LV application (specifi cally where communication facilities are required)
• Simple LV application For best cost effi ciency, several models of P211 enable you to tailor the device to your specifi c needs

Schneider MiCOM P543 line differential numerical relay is designed for high performance overhead line and cable applications, it interfaces readily with the longitudinal (end to end) communications channels and has optional distance backup protection.

Models available: MiCOM P541, MiCOM P542, MiCOM P543, MiCOM P544, MiCOM P545, MiCOM P546
The MiCOM P541-P546 series provides high-speed current differential unit protection. The P54x is designed for all overhead line and cable applications, as it interfaces readily with the longitudinal (end-end)communications channel between line terminals. The interface options support direct fibre optic, or multiplexed digital links.

Optimum selectivity is assured, as the scheme measures the currents entering and leaving the protected plant item. Instantaneous tripping results for an internal fault, with stability for any out-of-zone fault. Tripping uses a proven characteristic comparing differential current with through current, for ease of testing. Phase differential elements of this type offer consistent detection of solid and resistive faults, with optimum faulted phase selection, tripping, and indication.
A full range of back-up protection is integrated. This enhances the dependability of the protection, as hot-standby elements (such as distance zones and overcurrent) can be brought into service whenever a signalling channel outage may occur.
P543, P546 devices offer resident subcycle distance protection, to complement the powerful suite of main and backup protection already proven within the family. Full scheme, five zone distance protection is adopted from the class-leading MiCOM P443.
The P54x becomes the standard in all HV, EHV and UHV line protection applications, duplicated where dual redundant main protection is demanded. Set any combination of differential, distance, overcurrent, and reclosing, depending on the site needs.
One universal relay type instead of two or more discrete models means reduced spares holding, less training, and lower cost.
Breaker control and monitoring application
The MiCOM P544 & P546 is suitable for the complex installation and feeders controlled by two circuit breakers such as the breaker-and-a-half configurations. While MiCOM P543 & P545 are suitable for feeders controlled by a single circuit breaker.

Our catalog of Schneider Micom Protection Relays provides leading and reliable protection and control for any network application. The latest Protection Relays also offer comprehensive security and dependability for your electrical grid, from overcurrent and arc protection to distance and differential protection of the transmission line. Our product range offers solid protection with advanced communications such as the IEC 61850 to give you peace of mind in protecting your grid.

Easergy MiCOM P43x distance protection and One-Box devices are used for selective short circuit, ground fault and overload protection in all kinds of medium, high and extra-high voltage systems. Models available: Easergy MiCOM P433, Easergy MiCOM P435, Easergy MiCOM P437, Easergy MiCOM P439 and MiCOM P430CKey benefits:

• Extensive condition based monitoring features for generators and transformers
• Graphical programmable scheme logic eases protection scheme creation and avoids the need for external logic controllers
• Range of different protocols (MODBUS, DNP3, IEC 60870-5-103 and IEC 61850) are available
• IEC 61850 / DNP3.0 redundant Ethernet, supporting self healing ring, RSTP, dual homing or PRP
• Programmable curves for easy protection customization

Main characteristics:

• Sensitive rotor earth fault protection using low frequency injection method
• Harsh Environment Option to protect against corrosive gases such as H2S or SO2
• Generator and transformer thermal overload, transformer loss of life and through fault monitoring
• Extensive protection for large machines such as pole slipping and 100% stator earth fault protection (3rd harmonic and low frequency injection method)

Easergy MiCOM P43x offers a comprehensive range of protection functions as standard with optional hardware and software features available to satisfy your individual needs. Easergy MiCOM P439 One-Box solution also includes Bay Control up to 10 devices, including a library of more than 300 pre-engineered bay templates, to reduce your engineering time.
Information exchange is performed by inbuilt communication interfaces, using either serial protocols (IEC 60870-5-101, -103, Courier, DNP or Modbus) or an Ethernet interface using IEC 61850.

Easergy MiCOM P43x is scalable and available in modular 4U case sizes of 40TE or 84TE width, suitable for panel, rack or surface mounting. Wiring connections can be made with either ring or pin terminals, depending on preference and security. A detachable HMI is available to increase security and safety of local operation. Alternatively, it is also available in a Compact case MiCOM P430C, with reduced hardware functionality where mounting size is restricted.

Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. They include Overcurrent, Earth/Ground Fault and complete protection, advanced communication and integrated functions for feeders. Easergy MiCOM P14x protection relays also offer function keys for integral scheme control functionality.

The following models are available:

• Easergy MiCOM P141 – Feeder management relay
• Easergy MiCOM P142 – Feeder management with integrated Autoreclose
• Easergy MiCOM P143 – Feeder management, integrated Autoreclose and Check Synchronism
• Easergy MiCOM P145 – Feeder management, Autoreclose, Check Synchronism and Enhanced operator control functions

Housed in standard MiCOM 40TE, 60TE or 80TE, 4U case sizes, Easergy MiCOM relays offers a complete and scalable range of feeder protection, serial and Ethernet communications, including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese.

Easergy MiCOM P44x provides high speed and high performance distance protection for all overhead lines and cable applications and offers a comprehensive range of protection functions as standard. Models available: MiCOM P441, MiCOM P442, MiCOM P443, MiCOM P444, MiCOM P445, MiCOM P446

Features:
Easergy MiCOM P44x is complemented by various serial and Ethernet communication protocols including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese. Protection is further enhanced by the use of Programmable Scheme Logic within the device.

The range offers quadrilateral (polygon) or mho characteristics with a long history of high performance, load blinding areas, comprehensive range of teleprotection schemes, Power swing alarm and blocking and Multishot autoreclosure with check synchronism.

Housed in 40TE, 60TE or 80TE, 4U case sizes, this advanced distance protection range has fault clearance times of 0.7 to 1 cycle depending on model.  Easergy MiCOM P441, P442 and P444 operate on Quadrilateral distance characteristics, whereas Easergy MiCOM P443, P445 and P446 offer both Quadrilateral and Mho distance characteristics.

Latest communication protocols & Ethernet Redundancy 
Fully Equipped with the latest communications protocols (IEC61850 Ed1 & Ed2 available in the same device, selection by setting).
Maximum availability and reliability of Ethernet communications thanks to the implementation of PRP/HSR standard redundancy protocols with an instantaneous recovery time (0 ms) in case of network failure.
Dual IP address allows the device to be connected to 2 independent communication networks (e.g, SCADA system network & Maintenance network)
Universal IRIG-B input (automatically detects modulated or unmodulated signal)

Major enhancement to Cybersecurity 
Operational & Cybersecurity, compliant to IEC 62351, helps protect installations with security based on embedded features such as Role Based Access Control (RBAC), Port Hardening, Security Logs and Access Traceability. The IED by default includes RBAC with different users defined and a Security Administrator.