SOCOMEC Electrical Switches and UPS

Socomec 125A ATyS S/Sd products are 4 pole remotely operated transfer switches with positive break indication. They enable the on-load transfer of two three-phase supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.

They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

Weight : 5000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS S

Pole: 4 Pole

Advantages

Extensive power supply range

The ATyS S is available in four supply versions, each with a broad range (+/-30%). The four versions are:

• 12 VDC power supply.
• 24/48 VDC power supply.
• 230 VAC single power supply.
• 2 x 230 VAC dual power supply.

Safety and reliability

ATyS S products use stable position technology, ensuring constant pressure on the contacts and preventing premature faults. In addition, they do not require a power supply to maintain position, thus protecting their loads from voltage fluctuations.

Easy integration

ATyS S products can be easily installed inside enclosures. Their design, and in particular their compact size, enables integration within most 200 mm deep enclosures.

Simplified maintenance

Maintenance can be carried out easily under load, with manual operation still available. The control and motorisation section can be replaced simply by removing 4 screws, with no work required on the installation cabling.

ATyS d S: Dual power supply

In addition to the functions offered by the ATyS S, the ATyS d S incorporates supply redundancy without the need for additional wiring.This is obtained by integrating a double

supply (2 independent supplies) directly within the product.

The solution for

• Genset < 90 kVA
• Heating systems
• Climate control
• Ventilation systems
• Telecommunications

Strong Points

> Extensive power supply range

> Safety and reliability

> Easy integration

> Simplified maintenance

> ATyS d S: Dual power supply

Conformity to standards

> IEC 60947-6-1

> IEC 60947-3

> GB 14048-11

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:

Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range

a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:

All-in-one Automatic Transfer Switch for all applications from 125 to 3200A

c. ATyS Bypass:

Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A

d. STATYS:

Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

Socomec 40A ATyS S products are 4 pole remotely operated transfer switches with positive break indication. They enable the on-load transfer of two three-phase supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.

They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

Weight : 4000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS S

Pole: 4 Pole

Advantages

Extensive power supply range

The ATyS S is available in four supply versions, each with a broad range (+/-30%). The four versions are:

• 12 VDC power supply.
• 24/48 VDC power supply.
• 230 VAC single power supply.
• 2 x 230 VAC dual power supply.

Safety and reliability

ATyS S products use stable position technology, ensuring constant pressure on the contacts and preventing premature faults. In addition, they do not require a power supply to maintain position, thus protecting their loads from voltage fluctuations.

Easy integration

ATyS S products can be easily installed inside enclosures. Their design, and in particular their compact size, enables integration within most 200 mm deep enclosures.

Simplified maintenance

Maintenance can be carried out easily under load, with manual operation still available. The control and motorisation section can be replaced simply by removing 4 screws, with no work required on the installation cabling.

ATyS d S: Dual power supply

In addition to the functions offered by the ATyS S, the ATyS d S incorporates supply redundancy without the need for additional wiring.This is obtained by integrating a double

supply (2 independent supplies) directly within the product.

The solution for

• Genset < 90 kVA
• Heating systems
• Climate control
• Ventilation systems
• Telecommunications

Strong Points

> Extensive power supply range

> Safety and reliability

> Easy integration

> Simplified maintenance

> ATyS d S: Dual power supply

Conformity to standards

> IEC 60947-6-1

> IEC 60947-3

> GB 14048-11

Socomec 1000A ATyS r 3 or 4 pole remotely operated motorized transfer switches with positive break indication.

They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.

They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer

Weight : 80000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS R

Pole: 4 Pole

ATyS r products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product''s availability, i.e. whether it is operational and ready for source switching.

As part of the product monitoring function, the ATyS r enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.

ATyS r products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC ± 20%.

The updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.

The solution for

• Applications with an external ATS/AMF controller
• Building Management Systems (BMS)

Strong points

• Watchdog relay to check product availability
• Integrated auxiliary contacts
• Extended power supply range
• ATyS d: integrated dual power supply

Conformity to standards

> IEC 60947-6-1

> IEC 60947-3

> GB 14048.11

External automatic controller

> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:

Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range

a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:

All-in-one Automatic Transfer Switch for all applications from 125 to 3200A

c. ATyS Bypass:

Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A

d. STATYS:

Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range

a. ATyS S, ATyS d S:

Motorized and Remotely Operated Transfer Switch from 40 to 125A

b. ATyS d M:

Motorized and Remotely Operated Transfer Switch modular from 40 to 160A

c. ATyS r and ATyS d :

Motorized and Remotely Operated Transfer Switch from 125 to 3200A

Socomec 630A ATyS r and ATyS d are 3 or 4 pole remotely operated motorised transfer switches with positive break indication.

They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.

They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer

Weight : 20000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS R

Pole: 4 Pole

ATyS r products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product''s availability, i.e. whether it is operational and ready for source switching.

As part of the product monitoring function, the ATyS r enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.

ATyS r products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC ± 20%.

The updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.

The solution for

• Applications with an external ATS/AMF controller
• Building Management Systems (BMS)

Strong points

• Watchdog relay to check product availability
• Integrated auxiliary contacts
• Extended power supply range
• ATyS d: integrated dual power supply

Conformity to standards

> IEC 60947-6-1

> IEC 60947-3

> GB 14048.11

External automatic controller

> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:

Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range

a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:

All-in-one Automatic Transfer Switch for all applications from 125 to 3200A

c. ATyS Bypass:

Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A

d. STATYS:

Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range

a. ATyS S, ATyS d S:

Motorized and Remotely Operated Transfer Switch from 40 to 125A

b. ATyS d M:

Motorized and Remotely Operated Transfer Switch modular from 40 to 160A

c. ATyS r and ATyS d :

Motorized and Remotely Operated Transfer Switch from 125 to 3200A

Socomec 250A ATyS r and ATyS d are 3 or 4 pole remotely operated motorized transfer switches with positive break indication.

They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.

They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer

Weight : 7000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS R

Pole: 4 Pole

Advantages

Watchdog relay to check product availability

ATyS r and ATyS d products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product''s availability, i.e. whether it is operational and ready for source switching.

Integrated auxiliary contacts

As part of the product monitoring function, the ATyS r and ATyS d enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.

Extended power supply range

ATyS r and ATyS d products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC  20%.

ATyS d: integrated dual power supply

In addition to the functions offered by the ATyS r, the ATyS d incorporates supply redundancy without the need for additional wiring. This is obtained by integrating a double supply (2 independent power supplies) directly within the product.

The solution for

• Applications with an external ATS/AMF controller
• Building Management Systems (BMS)

Strong points

• Watchdog relay to check product availability
• Integrated auxiliary contacts
• Extended power supply range
• ATyS d: integrated dual power supply
• Conformity to standards

  > IEC 60947-6-1

  > IEC 60947-3

  > GB 14048.11

External automatic controller

> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:

Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range

a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:

All-in-one Automatic Transfer Switch for all applications from 125 to 3200A

c. ATyS Bypass:

Enclosed Automatic Transfer Switchin Equipment with Bypass from 125 to 3200A

d. STATYS:

Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range

a. ATyS S, ATyS d S:

Motorized and Remotely Operated Transfer Switch from 40 to 125A

b. ATyS d M:

Motorized and Remotely Operated Transfer Switch modular from 40 to 160A

ATyS C65

ATS Controller
Advanced functionalities

ATyS C65 is an advanced ATSE controller offering all the functions of the ATyS C55 with the addition of current, power & energy monitoring, increased I/O capacity and functions, load shedding, lift control function, energy backup, increased number of events and alarms (measurement and combination alarms) and DIRIS Digiware module compatibility.

Advantages

Fast commissioning

On initial power up, the ATyS C65’s smart wizard will guide the operator through the commissioning process.

User customisable

Front face LEDs, Load shedding, Genset schedulers and the lift control signal are just a few of the many customisable features available on ATyS C65.

Intuitive operation

• The high-resolution LCD screen provides several dashboards enabling easy monitoring of all parameters, including power and energy consumption of the loads.
• The integrated energy backup provides transitional power to the product enabling status indication (switch position, timer status, fault notifications) and communication to remain active with no supply present.
• Quick and easy access to main functions through the front face with direct key input.
• Complete configuration can be achieved through the front face or via software (EasyConfig).

General characteristics

• Self-powered from sensing.
• Wide voltage range (88 - 576 VAC).
• 24 VDC aux power supply (for optional use).
• 2 latching relays.
• Digiware IO-10: I/O extension up to 30 inputs and 18 outputs.
• Power & Energy metering with /1 A or /5 A current transformers.
• Energy backup.
• IP65 degree of protection (panel gasket included).
• 3000 Alarms and Events.
• Multiple fully configurable timers, thresholds and I/O.
• Easy config configuration software.
• Shock resistant IK08+.
• Digiware compatible (replaces U module).
• Ethernet, SNMP, BACnet using DIRIS M-70 gateway. Includes Webserver.
• A DIRIS Digiware D-70 gateway can be used as a remote display for multiple ATyS C55/C65 controllers; the D-70 also provides Ethernet, SNMP & BAC net  connectivity

ATyS C25 ATS Controller is an entry level ATSE controller with communications. It can be used to pilot a remotely operated transfer switch, such as ATyS r, ATyS S and ATyS d M, as well as contactors. ATyS C25 ensure the automatic or remotely controlled transfer from one source to another with fixed timers and thresholds.

Weight : 1000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS C25

The ATyS C25 controller can be mounted on either a DIN rail or to the panel door, offering flexibility and optimising space.

The ATyS C25 has an integrated DPS, for supplying the motorization of the switch, and can be door mounted, therefore there’s no need for an external DPS or display, reducing installation time and costs.

• 8 dip-switches allow very fast commissioning, even offline.

• All main functions such as remote position control, mode selection, lamp test and genset test on load are available on the front of the product allowing quick and easy operation.

• Remote product information is available through RS485 Modbus communication.

• Self-powered from sensing.

• Wide voltage range (184-300 VAC).

• 24 VDC aux power supply (for optional use).

• Main/Main or Main/Genset networks.

• Fixed I/Os.

• RS485 Modbus communication.

• Voltage sensing on all phases.

• Three-phase + Neutral & Single-phase + Neutral networks.

• Phase rotation checking.

• Door or DIN rail mounting.

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:

Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

To explore the comprehensive range of SOCOMEC electrical switches and UPS, click here!

ATyS C65

ATS Controller
Advanced functionalities

ATyS C65 is an advanced ATSE controller offering all the functions of the ATyS C55 with the addition of current, power & energy monitoring, increased I/O capacity and functions, load shedding, lift control function, energy backup, increased number of events and alarms (measurement and combination alarms) and DIRIS Digiware module compatibility.

Advantages

Fast commissioning

On initial power up, the ATyS C65’s smart wizard will guide the operator through the commissioning process.

User customisable

Front face LEDs, Load shedding, Genset schedulers and the lift control signal are just a few of the many customisable features available on ATyS C65.

Intuitive operation

• The high-resolution LCD screen provides several dashboards enabling easy monitoring of all parameters, including power and energy consumption of the loads.
• The integrated energy backup provides transitional power to the product enabling status indication (switch position, timer status, fault notifications) and communication to remain active with no supply present.
• Quick and easy access to main functions through the front face with direct key input.
• Complete configuration can be achieved through the front face or via software (EasyConfig).

General characteristics

• Self-powered from sensing.
• Wide voltage range (88 - 576 VAC).
• 24 VDC aux power supply (for optional use).
• 2 latching relays.
• Digiware IO-10: I/O extension up to 30 inputs and 18 outputs.
• Power & Energy metering with /1 A or /5 A current transformers.
• Energy backup.
• IP65 degree of protection (panel gasket included).
• 3000 Alarms and Events.
• Multiple fully configurable timers, thresholds and I/O.
• Easy config configuration software.
• Shock resistant IK08+.
• Digiware compatible (replaces U module).
• Ethernet, SNMP, BACnet using DIRIS M-70 gateway. Includes Webserver.
• A DIRIS Digiware D-70 gateway can be used as a remote display for multiple ATyS C55/C65 controllers; the D-70 also provides Ethernet, SNMP & BAC net  connectivity

Socomec 100A ATyS tM and ATyS g M are modular automatic transfer switches with positive break indication. ATyS t M are 4 pole (three-phase) devices and ATyS g M are 2 or 4 pole (single or three-phase) devices.

They have all the functions of the ATyS d M together with an integrated controller, giving them automatic features dedicated to mains/mains (ATyS t M) and mains/genset (ATyS g M) applications. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

Weight : 4000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS T M

Pole: 4 Pole

Quick start

ATyS t M and g M transfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.

ATyS g M: dedicated to mains/genset applications

In addition to its single-phase and three phase voltage & frequency monitoring for both incoming sources, the product''s integrated controller also features functions that are specific to mains/genset applications (genset control, test on load, etc.).

ATyS t M: dedicated to three-phase mains/mains applications

The ATyS t M integrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.

Secure programming

To ensure that the correct configuration is maintained an optional sealable cover can be fitted in order to avoid any unintentional modifications to the programming.

The solution for

• High-rise buildings
• Data centers
• Healthcare buildings

Strong Points

• Fast commissioning
• ATyS d M with an integrated controller for dedicated mains/mains or mains/genset functions
• Secure programming

Conformity to standards

> IEC 60947-6,-1

> IEC 60947-3

> GB 14048.11

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:

Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

Socomec 40A ATyS tM and ATyS g M are modular automatic transfer switches with positive break indication. ATyS t M are 4 pole (three-phase) devices and ATyS g M are 2 or 4 pole (single or three-phase) devices.

They have all the functions of the ATyS d M together with an integrated controller, giving them automatic features dedicated to mains/mains (ATyS t M) and mains/genset (ATyS g M) applications. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

Weight : 4000.000 in Gram

Brand : Socomec

Technical Specification

Model: ATyS T M

Pole: 4 Pole

Advantages

Quick start

ATyS t M and g M transfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.

ATyS g M: dedicated to mains/genset applications

In addition to its single-phase and three phase voltage & frequency monitoring for both incoming sources, the product''s integrated controller also features functions that are specific to mains/genset applications (genset control, test on load, etc.).

ATyS t M: dedicated to three-phase mains/mains applications

The ATyS t M integrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.

Secure programming

To ensure that the correct configuration is maintained an optional sealable cover can be fitted in order to avoid any unintentional modifications to the programming.

The solution for

• High-rise buildings
• Data centers
• Healthcare buildings

Strong Points

• Fast commissioning
• ATyS d M with an integrated controller for dedicated mains/mains or mains/genset functions
• Secure programming

Conformity to standards

> IEC 60947-6,-1

> IEC 60947-3

> GB 14048.11

We also provide SOCOMEC transfer switches required for different applications in industry grids.

A. SOCOMEC Transfer Switches:

Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range

a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:

All-in-one Automatic Transfer Switch for all applications from 125 to 3200A

c. ATyS Bypass:

Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A

d. STATYS:

Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range

a. ATyS S, ATyS d S:

Motorized and Remotely Operated Transfer Switch from 40 to 125A

b. ATyS d M:

Motorized and Remotely Operated Transfer Switch modular from 40 to 160A

c. ATyS r and ATyS d :

Motorized and Remotely Operated Transfer Switch from 125 to 3200A

They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer

Weight : 150000.000 in Gram
Brand : Socomec

Technical Specification
Model: ATyS R
Pole: 4 Pole

ATyS r products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product’s availability, i.e. whether it is operational and ready for source switching.

As part of the product monitoring function, the ATyS r enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.

ATyS r products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC ± 20%.

The updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.

The solution for

• Applications with an external ATS/AMF controller
• Building Management Systems (BMS)

Strong points

• Watchdog relay to check product availability
• Integrated auxiliary contacts
• Extended power supply range
• ATyS d: integrated dual power supply

Conformity to standards
> IEC 60947-6-1
> IEC 60947-3
> GB 14048.11

External automatic controller
> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).

We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range
a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:
All-in-one Automatic Transfer Switch for all applications from 125 to 3200A
c. ATyS Bypass:
Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A
d. STATYS:
Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range
a. ATyS S, ATyS d S:
Motorized and Remotely Operated Transfer Switch from 40 to 125A
b. ATyS d M:
Motorized and Remotely Operated Transfer Switch modular from 40 to 160A
c. ATyS r and ATyS d :
Motorized and Remotely Operated Transfer Switch from 125 to 3200A
d. ATyS d H :
Motorized and Remotely Operated Transfer Switch from 4000 to 6300A

3. Manual transfer switches range:
a. SIRCO M :
Compact Modular Manual transfer switches from 25 to 125A
b. SIRCO VM1 :
Opens 

Socomec 1250A ATyS r 3 or 4 pole remotely operated motorised transfer switches with positive break indication.
They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer

Weight : 80000.000 in Gram
Brand : Socomec

Technical Specification
Model: ATyS R
Pole: 4 Pole

ATyS r products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product''s availability, i.e. whether it is operational and ready for source switching.

As part of the product monitoring function, the ATyS r enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.

ATyS r products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC ± 20%.

The updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.

The solution for

• Applications with an external ATS/AMF controller
• Building Management Systems (BMS)

Strong points

• Watchdog relay to check product availability
• Integrated auxiliary contacts
• Extended power supply range
• ATyS d: integrated dual power supply

Conformity to standards
> IEC 60947-6-1
> IEC 60947-3
> GB 14048.11

External automatic controller
> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).

We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range
a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:
All-in-one Automatic Transfer Switch for all applications from 125 to 3200A
c. ATyS Bypass:
Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A
d. STATYS:
Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range
a. ATyS S, ATyS d S:
Motorized and Remotely Operated Transfer Switch from 40 to 125A
b. ATyS d M:
Motorized and Remotely Operated Transfer Switch modular from 40 to 160A
c. ATyS r and ATyS d :
Motorized and Remotely Operated Transfer Switch from 125 to 3200A
d. ATyS d H :
Motorized and Remotely Operated Transfer Switch from 4000 to 6300A

They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.

They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer

Weight : 15000.000 in Gram
Brand : Socomec

Technical Specification
Model: ATyS R
Pole: 4 Pole

ATyS r products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product''s availability, i.e. whether it is operational and ready for source switching.

As part of the product monitoring function, the ATyS r enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.

ATyS r products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC ± 20%.

The updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.

The solution for

• Applications with an external ATS/AMF controller
• Building Management Systems (BMS)

Strong points

• Watchdog relay to check product availability
• Integrated auxiliary contacts
• Extended power supply range
• ATyS d: integrated dual power supply

Conformity to standards
> IEC 60947-6-1
> IEC 60947-3
> GB 14048.11

External automatic controller
> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).

We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.

1. Automatic transfer switches range
a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A

b. ATyS t, g & p:
All-in-one Automatic Transfer Switch for all applications from 125 to 3200A
c. ATyS Bypass:
Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A
d. STATYS:
Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A

2. Remotely operated transfer switches range
a. ATyS S, ATyS d S:
Motorized and Remotely Operated Transfer Switch from 40 to 125A
b. ATyS d M:
Motorized and Remotely Operated Transfer Switch modular from 40 to 160A
c. ATyS r and ATyS d :
Motorized and Remotely Operated Transfer Switch from 125 to 3200A
d. ATyS d H :
Motorized and Remotely Operated Transfer Switch from 4000 to 6300A

3. Manual transfer switches range:
a. SIRCO M :
Compact Modular Manual transfer switches from 25 to 125A