Siemens Ethernet Switch

The RUGGEDCOM RS416 is a utility-grade serial device server with an integrated, fully managed Ethernet switch. It features a modular design that can support IEEE 1588 and IRIG-B time synchronization, up to 16 serial ports, and up to 4 Ethernet ports. As such, it can be used to interconnect and synchronize multiple types of intelligent electronic devices (IEDs).

RUGGEDCOM RS416P

The RUGGEDCOM RS416P is a utility-grade, serial device server with integrated, fully managed, 4-port Power-over-Ethernet (PoE) switch. With its modular design, it can support up to 16 serial ports and interconnect multiple types of intelligent electronic devices (IEDs) with varying methods of communication.

Cyber Security Features

• Multilevel user passwords secure switch against unauthorized configuration
• SSH/SSL – extends capability of password protection to add 128-bit encryption of passwords and data as they cross the network
• Enable/disable ports – capability to disable ports so that traffic cannot pass
• 802.1Q VLAN – provides the ability to logically segregate traffic between predefined ports on switches
• MAC-based port security – provides the ability to secure ports on a switch so only specific devices / MAC addresses can communicate via a port
• 802.1x port-based network access control – provides the ability to lock down ports on a switch so that only authorized clients can communicate via a port
• RADIUS – authentication service using MD5 and providing centralized password management
• SNMPv3 – encrypted authentication access security and data encryption (CBC- DES with 56-bit encryption key)
• Secure Socket Layer – Web-based management using SSL with data encryption (128-bit encryption key)
• RSA – 1,024-bit key for key management and key exchange
• TACACS+ – Terminal Access Control and Accounting Services Client provides encrypted authentication and authorization
• Point-to-Point Protocol (PPP) – using CHAP (MD5) authentication service
• SFTP – Secure File Transfer Protocol using SSH encryption

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges:

- Meets IEEE 1613 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable-speed drive systems)
- Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)

• Fully independent 2kV (RMS) isolated serial ports
• Operating temperature: -40°C to +85°C (no fans)
• 18 AWG galvanized steel enclosure

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation and crossover detection
• Integrated cyber security features
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 MS)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supplies
• PoE power supply: 48 VDC

The RUGGEDCOM RSG2300/RSG2300P is a utility-grade, fully managed, 32-Port Managed Ethernet Switch with 4 Modular Gigabit Uplink Ports. The RSG2300''s modular flexibility offers 10BaseFL /100BaseFX /1000BaseX fiber and 10/100/1000BaseTX copper port combinations.

The RUGGEDCOM RSG2300 is a utility-grade, fully managed, 32-Port managed Ethernet switch with 4 modular gigabit uplink ports. With its modular flexibility, the RSG2300 offers 10BaseFL /100BaseFX /1000BaseX fiber and 10/100/1000BaseTX copper port combinations. Optional front or rear mount connectors make the RSG2300 highly versatile and suitable for any application. It can support multiple fiber connectors (ST, MTRJ, LC, SC) without loss of port density.

The RUGGEDCOM RSG2300P is a utility-grade, fully managed, power-over-Ethernet (PoE) enabled, modular Ethernet switch. It is specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2300P comes standard with 2 10/100BaseTX 802.3af (PoE) compliant Ethernet ports, with the option to add an additional 2 PoE ports. It offers modular flexibility for up to 6 additional Ethernet ports, including 10BaseFL/100BaseFX/1000BaseX fiber and 10/100/1000BaseTX copper port combinations. The highly versatile RSG2300P can support multiple fiber types and connectors (ST, MTRJ, LC, SC) without loss of port density. It is an ideal solution to power and connect several Ethernet devices (e.g. IP phones, video cameras and wireless access points) where AC power is not available or cost-prohibitive to provide locally.

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges:

- Zero-Packet-Loss™ Technology - Meets IEEE 1613 Class 1 (electric utility substations) - Exceeds IEC 61850-3 (electric utility substations) - Exceeds IEC 61800-3 (variable-speed drive systems) - Exceeds IEC 61000-6-2 (generic industrial) - Exceeds NEMA TS-2 (traffic control equipment)

• Operating temperature: -40°C to +85°C (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
• Hazardous location certification: Class 1 Division 2

Cybersecurity Features

• Mutilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

RUGGEDCOM Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 MS)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)
• Industrial automation features (e.g. Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

The Rugged Switch RS900NC is a 9-port industrially hardened, fully managed, Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding environments. The RS900NC provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curb side traffic control cabinets. An operating temperature range of – 40 to +85°C(- 40 to +185°F) coupled with hazardous location certification (Class 1 Division 2) allows the RS900NC to be placed in almost any location. The RS900NC is packaged in a compact, galvanized steel enclosure that allows either DIN or panel mounting for efficient use of cabinet space. The RS900NC provides an integrated power supply with a wide range of voltages (88-300VDC or 85-264VAC) for worldwide operability or dual-redundant, reversible polarity, 24VDC and 48VDC power supply inputs for high availability applications requiring dual or backup power inputs. The RS900NC’s superior ruggedized design coupled with the embedded Rugged Operating System (ROS) provides improved system reliability and advanced net working features making it ideally suited for creating Ethernet networks for mission-critical, real-time, control applications. The versatility and wide selection of fiber optics allows the RS900NC to be used in a variety of applications. The RS900NC provides up to three 100Mbps fiber optical Ethernet ports for creating a fiber optical backbone with high noise immunity and long haul connectivity. All Rugged Com products are backed by a five year warranty and unsurpassed technical support.

Features and Benefits:

• Ethernet Ports
  Up to 9 Ports: 6 Base 10/100 BaseTX ports with option for 3 additional Fiber or Copper ports
• Industry standard fiber optical connectors:
• LC, SC, ST, MTRJ
• Multi mode and Single mode optical transceivers
• Long haul optics allow distances up to 90 km

Cyber Security Features:

• Multi-level user passwords
• SSL with 56-bit encryption
• Enable/disable ports, MAC based port security
• Port based net work access control (802.1x)
• VLAN (802.1Q) to segregate and secure net work traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Management Tools:

• Web-based, Telnet, CLI management inter face
• SNMP v1/v2/v3 (56-bit encryption)
• Remote Monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options:

• Fully integrated power supply
• Universal high-voltage range: 88-300VDC or 85-264VAC
• Dual low-voltage DC inputs: 24VDC (10-36VDC) or 48VDC (36-72VDC)
• Terminal blocks for reliable maintenance free connections
• CSA/UL 60950 safety approved to +85°C

The RUGGEDCOM RS900 is a 9-port utility-grade, fully managed Ethernet switch, specifically designed to operate reliably in electrically harsh and climatically demanding environments. The RS900 provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curbside traffic control cabinets. An operating temperature range of –40 to +85°C (–40 to +185°F), together with hazardous location certification (Class 1 Division 2), allows the RS900 to be placed in almost any location.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• Up to 9 ports: 6 Base 10/100BaseTX ports with an option for 3 additional fiber or copper ports
• Industry standard fiber optic connectors: LC, SC, ST, MTRJ
• Multimode and single-mode optical transceivers
• Long-haul optics allow distances up to 90 km

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges - Meets IEEE 1613 (electric utility substations)
  - Exceeds IEC 61850-3 (electric utility substations)
  - Exceeds IEC 61800-3 (variable-speed drive systems)
  - Exceeds IEC 61000-6-2 (generic industrial)
  - Exceeds NEMA TS-2 (traffic control equipment)
• Hazardous location certification: Class 1 Division 2
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards (optional)

Cybersecurity Features

• Mutilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

RUGGEDCOM Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• Industrial automation features (e.g. Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supply
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Dual low-voltage DC inputs: 24 VDC (10–36 VDC) or 48 VDC (36–72 VDC)
• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to +85°C

The RUGGEDCOM M969 switch is a MIL-STD, fully managed Ethernet switch, providing dual fiber optical Ethernet ports and eight Fast Ethernet copper ports in a MIL-STD 901D-rated package (for protection against vibration and shock impacts). It is IP66/IP67 rated for protection against strong jets of water (IP66) and temporary immersion in water (IP67).

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• Fiber optical Ethernet ports (100BaseX and 1000BaseX) with IP66/IP67-rated fiber optical connectors (type LC)
• 8 fast Ethernet ports (10/100BaseTX) with IP66/IP67-rated M12 D-code connectors or IP66/IP67-rated shrouded RJ45-style connectors

Cybersecurity

• Multilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Rugged Rated for Reliability in Harsh Environments

• MIL-S 901D Shock
• IP67 rated for protection against immersion in water
• IP66 rated for protection against strong jets of water
• Immunity to EMI and heavy electrical surges
• Hazardous location certification: Class 1 Division 2
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards

RUGGEDCOM Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation (802.3ad)
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• Industrial automation features (e.g., Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supplies (no external adapters)
• Popular low-voltage ranges: 24 VDC (10–36 VDC), 48 VDC (36–59 VDC)
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Dual-redundant, parallel load-sharing power supplies (optional)
• Powered from different sources
• Available with M23-style connectors
• CSA/UL 60950 safety approved to +85°C

The RUGGEDCOM RMC40 is a 4-port unmanaged Ethernet switch that provides both copper-to-fiber media conversion as well as 10Mbps to 100Mbps speed conversion. Specifically designed to operate reliably in electrically and climatically harsh environments it is well suited for use in mission critical Ethernet networking applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

4 Ethernet Ports with Single/Dual Fiber Optics

• Three configurations to choose from:

2x 10/100TX ports + 1x 100FX port (SC/ST)
2x 10/100TX ports + 2x 100FX port (MTRJ/LC)
4x 10/100TX ports

• Multimode and single-mode optical transceivers
• Industry standard fiber-optic connectors: LC, SC, ST, MTRJ
• Long-haul optics allow distances from 20 km to 90 km

Universal Power Supply Options

• Input voltages of 24 VDC, 48 VDC, and high-voltage (88–300 VDC or 85–264 VAC) for worldwide operability
• Integrated power supply eliminates need for an awkward external power transformer
• Screw-down terminal blocks ensure reliable, maintenance-free connections
• CSA/UL 60950 safety approved to +85°C

Designed for Harsh Environments

• Exceeds IEC 61850-3 and IEEE 1613 (electric power substations)
• Exceeds NEMA TS-2 (traffic control equipment)
• Operates over a temperature range of –40°C to +85°C without the use of fans for improved reliability
• 21 AWG galvanized steel enclosure and DIN or panel mounting options provide secure mechanical reliability

High-Performance Ethernet Switching

• Full compliance with IEEE 802.3 and IEEE 802.3u Ethernet standards for universal interoperability
• Non-blocking, store and forward switching with only 10 µs latency for high network throughput
• Full duplex operation results in no collisions
• Deterministic network response and flow control via 802.3x pause frames results in no collisions or dropped packets

Simple Plug and Play Operation

• Automatic learning of up to 2,048 MAC addresses
• Auto-negotiation on 10/100TX ports simplifies setup
• Auto-MDI/MDIX on all 10/100TX ports eliminates need for crossover cables
• LED indicators for link, activity, and speeds aid in field
• troubleshooting

The RUGGEDCOM RMC8388 is a rugged, small form factor time converter that converts PTP (IEEE 1588) to IRIG-B or PPS time signals. The RUGGEDCOM RMC8388 saves high maintenance costs on legacy coax cabling by allowing their replacement with standard Ethernet cabling for both communications and timing purposes, all the way to the switchyard cabinets.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Time interface specifications

• IRIG-B: Unmodulated (PWM) and Amplitude Modulated (sine wave)
• PPS

PTP specifications

• PTP version 2 (IEEE 1588) supported
• 100 FX, multimode, 2 km, LC Ethernet port fiber optic
• 100 TX , RJ45 / FastConnect™ Ethernet port copper
• Power, P2P and E2E profiles supported<
• IEEE 1344, C37.118-2005, C37.118-2011 PMU protocol support

Power supply options

• 24 nominal: 11 – 36 VDC

Rugged Rated for reliability in harsh environments

• Immunity to EMI and heavy electrical surges - Zero-Packet-Loss™ technology
  - Meets IEEE 1613 (electric utility substations) Class 1 with copper ports or Class 2 with all fiber ports
  - Exceeds IEC 61850-3 (electric utility substations)
• -40 °C to +85 °C operating temperature (no fans)
• Conformal coated printed circuit boards (optional)

IRIG configuration options

• B000 – B007, B120 – B127 IRIG formats supportedn

PPS configuration options

• 1 to 200 ms configurable pulse width
• 1 to 86400 seconds configurable pulse interval

Approvals and certifications

• Safety:

– IEC 60950-1 – EN 60950-1 – CSA/UL 60950-1

• EMI:

– CISPR22 – EN55022 – FCC Part15 Class A

• EMC:

– IEC / EN 61000-6-2

• Electric utility substations:

– IEEE 1613 – IEC 61850-3

• Vibration:

– IEC 60255-21-1, Class 2

• Shock:

– IEC 60255-21-2, Class 2

• Humidity:

– IEC 60068-2-30, up to 95% relative humidity

The RUGGEDCOM RP110 provides the flexibility to power remote PoE devices using standard 5 cable. Converging data and power onto a single cable saves costs, space, and labor for new and existing installations. In addition to a power injector, the RP110 has a built-in serial server, designed to bridge legacy serial devices onto an IP network. It offers a single interface capable of supporting RS422, 485, and 232 protocols, and is protocol aware for certain common serial protocols such as DNP and Modbus.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Unmatched Reliability

• The RP110 provides stability and performance under high levels of temperature variation, EMI stress, and voltage fluctuation that occur in electrical and industrial applications.
• Rugged Rated, –40°C to +85°C temperature rating
• IEEE 1613 and IEC 61850-3 compliance means continued operation in harsh environments

Network Design Flexibility

• The RP110 is a configuration-free plug and play device suitable for any Power over Ethernet connection to a RUGGEDCOM WIN subscriber unit.
• Supports a wide range of AC and DC input voltages
• Space-saving compact design with DIN rail or panel mount
• Reduces cabling, connection, and power supply requirements for PoE devices

Safety and Performance

• The RP110 has the same certifications as protection and control devices providing the confidence and assurance of continued operation even in the worse conditions.
• Automatic detection of remote power devices
• Output fault protection
• -40°C to +85°C temperature rating

Substation Rated:

• IEC 61850-3
• IEEE 1613
• –40°C to +85°C operating temperature range (no fans)

Industrial Design:

• Panel or DIN mounting
• Lightweight cast aluminum enclosure
• LED indicators for link, activity, and speeds aid in field troubleshooting

Performance:

• Configuration-free, plug and play operation
• RM version for connection to RUGGEDCOM WIN products

Rugged Operating System (ROS©)

• The RP110 includes a subset of the features of the industry leading ROS© operating system, including:
• Remote management and logging
• Serial IP encapsulation
• SNMP based network management
• Precision timing support

The RS8000 family of utility-grade, fully managed Ethernet switches is specifically designed to operate reliably in electrically and environmentally harsh environments.The RS8000 Zero-Packet-Loss technology provides a high level of immunity to electromagnetic interference (EMI) and heavy electrical surges typical of environments found in electric utility substations, industrial plant floors, or curbside traffic control cabinets. The RS8000 provides IEEE 1613 Class 2 error-free communications performance under EMI stress. An operating temperature range of –40 to +85°C (–40 to +185°F) allows RS8000 family devices to be placed in almost any location.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• RS8000: 8x 100BaseFX
• RS8000T: 6x 10/100BaseTX + 2x 100BaseFX (MTRJ/LC connectors)
• RS8000H: 4x 10/100BaseTX + 4x 100BaseFX (SC/ST connectors)
• RS8000A: 2x 10/100BaseTX + 2x 10BaseFL + 4x 100BaseFX
• Multimode and single-mode optical transceivers
• Industry standard fiber-optic connectors: LC, SC, ST, MTRJ

Cybersecurity

• Multilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges

- Zero-Packet-Loss™ technology (RS8000)
- Meets IEEE 1613 Class 2 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable-speed drive systems)
- Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)

• –40°C to +85°C operating temperature (no fans)
• Failsafe output relay: for critical failure or error alarming
• Conformal coated printed circuit boards (optional)

RUGGEDCOM Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) and GVRP support
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• Loss-of-link management on fiber ports

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Popular low-voltage ranges: 24 VDC (10–36 VDC), 48 VDC (36–59 VDC)
• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to +85°C

The RUGGEDCOM RS900GP is a 10-port utility-grade, fully managed Ethernet switch, providing dual fiber optic or copper Gigabit Ethernet ports and eight fast Ethernet copper ports, each capable of supplying high power 802.3at compliant power over Ethernet. Designed to operate reliably in harsh industrial environments, the RS900GP provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found in electric utility substations, factory floors or in traffic control cabinets. The RS900GP offers two fiber optic Gigabit Ethernet ports for creating a fiber optic backbone with high noise immunity and long haul connectivity.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• 8 Fast Ethernet ports (10/100BaseTX), all external 802.3af / 802.3at-compliant PoE
• Up to 2 Fiber Optical Gigabit Ethernet ports (100/1000BaseX)
• Up to 2x 10/100/1000 BaseTX copper ports
• Multiple fiber connector types (LC, SC,ST, SFP Pluggable Optics)
• Bidirectional single strand fiber support
• Long-haul optics allow Gigabit distances up to 70 km

Power Over Ethernet (PoE)

• 8x 10/100BaseTX 802.3af / 802.3at-compliant ports
• Data and power over a single Ethernet cable
• Auto-sensing ports provide power only to PoE end devices
• Compatible with RUGGEDCOM WIN CPE and Pico base stations

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges

- Meets IEEE 1613 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable-speed drive
systems) - Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)

• Hazardous location certification: Class 1 Division 2
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards (optional)

Cybersecurity Features

• Mutilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

RUGGEDCOM Operating System (ROS®) Features

• Simple plug and play operation automatic learning, negotiation, and crossover detection
• MSTP (802.1Q-2005, formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Industrial automation features (e.g. Modbus)

Dual Power Input

• 54 VDC (44–57 VDC), 160 W (powers 8 ports with 802.3af or 4 ports 802.3at)
• 2x 54 VDC, 160 W (powers 8 ports with 802.3at)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

The RUGGEDCOM RSG2200 is a utility-grade, fully managed, modular Gigabit Ethernet switch, specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2200''s modular flexibility offers 1000BaseX fiber and 10/100/1000BaseTX copper port combinations. Support for front or rear mount connectors coupled with multiple fiber connector types (SFP, GBIC, LC, SC) without loss of port density makes the RSG2200 highly versatile and suitable for any application. The RSG2200 is packaged in a rugged galvanized steel enclosure with industrial grade DIN, panel, or 19" rack mount options.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports M2100

• Up to 9 Gigabit Ethernet ports

– copper and/or fiber

• 2 port modules for tremendous flexibility
• Non-blocking, store and forward switching
• Supports many types of fiber (multimode, single mode, bidirectional single strand)
• Long-haul optics allow Gigabit distances up to 70 km
• Multiple connector types (ST, MTRJ, LC, SC)

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges

- Zero-Packet-Loss™ Technology
- Meets IEEE 1613 Class 2 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable-speed drive systems)
- Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)

• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
• Hazardous location certification:

Class 1 Division 2

Cybersecurity Features

• Mutilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Rugged Operating System (ROS®) Features

• Simple plug and play operation automatic learning, negotiation, and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)
• Industrial automation features (e.g. Modbus)

Universal Power Supply Options

• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Popular low-voltage ranges: 24 VDC(10–36 VDC), 48 VDC (36–72 VDC)
• Screw or pluggable terminal blocks available
• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to +85°C

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)

The RUGGEDCOM RSG907R is a compact Gigabit IEEE 1588 compatible Ethernet switch supporting High Availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol according to IEC 62439-3.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet ports

• 3 x RNA (Redundant Network Access) and coupler Ethernet ports according to IEC 62439-3 (1000BASE-X)
• 6 x SAN (Singly Attached Node) copper ports (10/100/1000BASE-TX)
• Multiple fiber connector types (SFP, LC)

Cyber security

• Passwords – support for multiple access levels with separate credentials for each level
• SSH / SSL – extends capability of password protection to add encryption of passwords and data as they cross the network
• Enable / disable ports – capability to disable ports so unauthorized devices can’t connect to unused ports
• SNMPv3 – encrypted authentication and access security
• HTTPS – for secure access to the web interface
• 802.1x – to ensure only permitted devices can connect to the device
• MAC address authentication – control access to devices that do not support RADIUS

Universal power supply options

• Fully integrated redundant power supply
• Universal high-voltage input: 120 V AC/DC and 230 V AC/DC
• Dual low-voltage DC inputs: 24/48 VDC

(12 – 60 VDC)

• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to +85° C

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges

- Zero-Packet-Loss™ technology
- Meets IEEE 1613 Class 2 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable-speed drive
systems) - Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)

• –40°C to +85°C operating temperature (fanless)
• Conformal coated printed circuit boards (optional)
• Extruded aluminum enclosure

RUGGEDCOM Operating System (ROS®) Features

• Simple plug-and-play operation – automatic learning, negotiation, and crossover detection
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Port configuration, status, statistics, mirroring, security
• Loss-of-link management on fiber ports
• SNTP time synchronization (client and server)

Combining Ethernet switching, wireless LAN, routing and firewall functionality in one, the RUGGEDCOM RX1400 holds its own in the most demanding industrial environments. As a cellular router, it eliminates the need for extensive communication infrastructures. In addition to providing IP40 protection, it requires no internal fans for cooling to operate reliably in an extended temperature range of -40 C to +85 C.

The RUGGEDCOM RX1400, thanks to its compact form factor and multi-function capability, offers a cost saving solution for large scale deployments by avoiding the need for multi-device solutions to achieve the needed interface, switching, routing and application hosting capabilities.

The RUGGEDCOM VPE1400 provides a virtualized environment to run a guest Linux operating system and third party applications on the RX1400, enabling intelligence at the network edge.

Virtualization allows a full Linux image (with dedicated storage media and I/O ports) to run in parallel with the RUGGEDCOM ROX II, using a Linux KVM (Kernel Virtual Machine) based solution. The KVM ensures that the guest OS and third party applications can run without impacting RUGGEDCOM RX1400 core services running on the system. The RUGGEDCOM RX1400 is an all-in-one solution for plug-and-play connectivity to MindSphere. This compact, single device solution provides the combined capabilities of data acquisition, conversion and communication with MindSphere.

Communication interfaces

• 2 SMA ports for Wireless WAN Interface (4G/3G/2G) with up to 100 Mbit/s bandwidth
• 4 x 10/100 Mbits/s ports (10/100TX)
• 2 x 1000 Mbit/s SFP ports (1000LX) for long reach fiber optic connections (up to 100 km)
• 2 Serial Ports RS232/RS422/RS485 (DB9)
• 2 R-SMA ports for Wireless LAN Interface supporting IEEE 802.11a/b/g/n with up to 100 Mbit/s bandwidth

Other interfaces

• SMA port for GPS
• RS232 console port for local management / diagnostics on the device
• Isolated built-in power input (12-24 VDC)

Rugged Rated for harsh environments

• -40 C to +85C operating temperature (no fans)
• CSA/UL 60950 safety approved to +85C

Management tools

• Web-based, SSH, CLI management interfaces
• SNMP v1/v2/v3
• Remote Syslog
• Rich set of diagnostics with logging and alarms
• Loopback diagnostic tests
• Raw and interpreted real time line traces

Software features

• Running ROX II Operating System
• Virtualization allows a full Linux image (with dedicated storage media and I/O ports) to run in parallel with the ROX II operating system.
• Enhanced security / reliability through data and control path separation
• Single file configuration automation ensures easy installation and configuration control
• Automatic rollback in the event of configuration errors
• NETCONF configuration interface supports powerful remote configuration and status features
• Port rate and Broadcast Storm Limiting
• Port configuration, status, statistics, mirroring
• Routing Protocols OSPF, BGP, RIPv1 and v2
• Virtual Router Redundancy Protocol (VRRP)
• NTP time synchronization (client and server)
• Redundancy protocols MSTP 802.1Q-2005, RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP) for network
• fault recovery
• Quality of service (802.1p) for real-time traffic

The RUGGEDCOM RS950G is an IEC 62439-3 Redundancy Box (RedBox), supporting both High Availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol (PRP). The RS950G provides the ultimate in network reliability from any network fault. This is achieved by simultaneously transmitting duplicate packets on independent routes through the network to provide complete path redundancy at the data link layer.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• 3 configurable copper or fiber ports

- 2 IEC 62439 Ethernet ports (HSR or PRP)
- 1 Access port for standard IEEE 802.3 Ethernet devices

• SFP pluggable fiber transceiver with 100FX or 1000LX/SX options
• 3 X 10/100/1000 BaseT copper ports (disabled when SFP present)
• RS232 Console Port
• Up to 70km with long-haul optics
• LED Status Indicators

Cybersecurity

• Passwords – Multilevel user passwords secure switch against unauthorized configuration
• SSH / SSL – Extends capability of password protection to add 128-bit encryption of passwords and data as they cross the network
• MAC-based port security – Ability to secure ports on a switch so only specific devices / MAC addresses can communicate via that port
• RADIUS – Authentication service using MD5 and providing centralized password management
• SNMPv3 – Encrypted authentication access security and data encryption (CBC-DES with 56-bit encryption key)
• Secure Sockets Layer – Web-based management using SSL with data encryption (128-bit encryption key)

Precision Timing

• IEEE 1588 v2 with hardware time stamping on all ports (1-step and 2-step)
• Transparent clock operation for high precision on switched networks (better than 1 µs accuracy)

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges

- IEC 62439-3 PRP
- Meets IEEE 1613 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)

• –40°C to +85°C operating temperature
• No moving parts
• Conformal coated printed circuit boards (optional)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms
• IEC 62439 MIB Support

Universal Power Supply Options

• Fully integrated power supply
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Dual low-voltage DC inputs: 24 VDC (10–36 VDC) or 48 VDC (36–72 VDC)
• Terminal blocks for reliable, maintenance-free connections

The RUGGEDCOM WIN7200 is a lightweight broadband wireless base station, compliant with the IEEE 802.16e standard, designed for use in unlicensed or lightly licensed frequency bands in harsh environments. The WIN7200 is a single sector lightweight base station that can be easily installed on poles, street lamps or walls, and provides connectivity to fixed or mobile end points. Connected via a single Power-over-Ethernet (PoE) connection and easily provisioned, the WIN7200 reduces operational cost and complexity. The WIN7200 system is powered by OFDMA radio technology, which is robust in adverse channel conditions and enables Non-Line-Of-Sight (NLOS) operation. Leveraging link adaptation algorithms, modulation and coding are continuously adapted to prevailing link conditions, ensuring an optimal balance between robustness and efficiency.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Product Features & Specs

• Mobile WiMAX compliance based on IEEE 802.16e standard and WiMAX Forum Wave2 (MIMO) certification
• Support of worldwide WiMAX deployments in the 2.X GHz, 3.X GHz, 4.9 GHz,and 5.8 GHz band
• Adaptive modulation: to optimize throughput and facilitate performance robustness
• Ecosystem compatibility with any RUGGEDCOM WIN product or 802.16e standard compliant WiMAX network equipment
• Long range: transmit and receive diversity combined with high power for improved reach and NLOS performance.
• High bandwidth: RUGGEDCOM WIN has two built-in radios operating on the same frequency simultaneously (MIMO) to increase bandwidth (up to 40Mbps) and spectral efficiency.
• Lowest frequency use: leverages OFDMA and built in GPS to enable users to deploy an entire network on a single frequency channel.
• Usage models: designed to support long range connections to fixed, portable and mobile end points, supporting vehicular speed seamless mobility and backhaul mode.
• Quality of service: RUGGEDCOM WIN gives the user the ability to separate traffic types over the air and guarantee latency, minimum bandwidth and jitter according to application needs.
• Rugged form factor: RUGGEDCOM WIN is an all outdoor rugged form factor enabling flexible deployment options. RUGGEDCOM products are designed for use in harsh environments such as those found in electrical power substations, oil refineries, military applications, roadside traffic control cabinets and metals and minerals processing.
• Standalone architecture: commercial broadband wireless equipment requires an entire network infrastructure to be in place including a specialized mobile router called an ASN gateway, which acts as a central point for all network traffic. This infrastructure can be very costly and complex to implement. Siemens has developed a mode which does require this heavy infrastructure but maintains the interoperability and technology advances of broadband wireless.
• More secure: RUGGEDCOM WIN has many built-in features to ensure NERC CIP compliance such as two factor mutual authentication, AES encryption and message integrity protection using CMAC.

RUGGEDCOM NMS is a scalable, fully-featured, enterprise-grade solution for monitoring, configuring and maintaining RUGGEDCOM mission-critical networks. It improves operational efficiency, speeds up system provisioning, and preserves data validity, while allowing focus on the key events in the network.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Key features supported by RUGGEDCOM NMS include:

• Centralized web based management of your RUGGEDCOM and IP-network.
• Auto-discovery of device links and services and representation on a network map.
• Real-time monitoring and notification of events, alarms and thresholds.
• Continuous collection of traffic statistics for analysis and reporting.
• Deployment of firmware/software upgrades across RUGGEDCOM devices.
• Automatic backup of RUGGEDCOM device configuration data.
• Creation of templates and propagation of configuration changes across ROX II devices.
• Monitors ROS and ROX II configurations and reports changes that exceed the authorized user-defined boundaries.
• Bulk password changes of ROS, ROX I and WIN based RUGGEDCOM devices.

RUGGEDCOM NMS platform

• Monitors a large number of nodes from a single workstation.
• Versatile pooling engine adapt rules used to customer needs.
• Continuously monitors the network and reports any changes or errors it detects.

The RMC20 is a utility-grade, protocol-independent, serial-to-fiber and serial standards converter for all your serial communication requirements.The RMC20 allows RS485, RS422, or RS232 devices or networks to communicate over secure, noise immune, optically isolated, fiber optic cabling at extended distances, as well convert RS232 to either RS485 or RS422 serial standards.The RMC20 was designed specifically to provide years of maintenance free operation for all your mission-critical, realtime control applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Port Options

• Protocol independent RS485, RS422, or RS232 (user selectable) conversion to multimode fiber optics (ST connector only)
• RS232 to RS485/422 conversion mode
• Fully EIA/TIA RS485, RS422, RS232 compliant communications
• Built-in, defeatable, RS485/RS422 termination networks
• Point-to-point, or optical loop configurations
• Full or half duplex configurable
• Support for high-speed serial baud rates from 300 to 115200 baud

Key Features

• Extend lengths of serial connections (up to 5km/hop)
• Media conversation is transparent to end devices

Universal Power Supply Options

• 24VDC, 48VDC or HI (88-300VDC / 85 - 264VAC) options for worldwide operability
• Integrated high-reliability power supply eliminates the need for external power transformer
• Screw down terminal blocks ensure reliable maintenance-free connections
• All power supplies CSA/UL 60950 approved for +85°C (+185°F) operation

Designed for Harsh Environments

• Exceeds IEC 61850-3 and IEEE 1613 standards for communication equipment in electric power substations.

• Operates over a temperature range of -40°C to +85°C without the use of fans for improved reliability
• 21 AWG galvanized steel enclosure suitable for DIN or panel mounting provide secure mechanical reliability

Simple Plug-and-Play Operation

• Simple, externally-accessible configuration
• Transmit and receive data LED indicators for quick and easy troubleshooting
• Fully integrated power supply connects directly to power source permanently for reliable maintenance-free operation