SIEMENS Ethernet Switch Ruggedcom

The RUGGEDCOM RX5000 integrated switch and router is a high-port-density Ethernet routing and switching platform designed to operate in harsh environments. This integrated switch and router can withstand high levels of electromagnetic interference, radio frequency interference, and a wide temperature range of –40°C to +85°C. This platform is designed to meet the challenging climatic and environmental demands found in utility, industrial, and military network applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ports Options

• Up to two 10 Gigabit uplinks
• Up to 24 Gigabit ports
• Up to 96 10/100TX copper ports
• Up to 48 100FX optical ports
• Long-haul optics allow distances up to 90 km
• Multiple connector types (ST, MTRJ, LC, SC)

Cybersecurity Features

• Integrated router/firewall/VPN
• Stateful firewall with NAT
• Full IPSec virtual private networking
• VPN with 3DES, AES128, AES256 support
• Substation Automation Software RUGGEDCOM CROSSBOW for NERC CIP cybersecurity compliance
• RADIUS centralized password management
• Multilevel passwords
• SSH/SSL encryption
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• SNMPv3 encrypted authentication and access security

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and high-voltage electrical transients
• Zero-Packet-Loss™ Technology
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable-speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial environment)
• Exceeds NEMA TS-2 (traffic control equipment)
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards (optional)

ROX™II Software Features

• Next generation of ROX™
• Layer 3 switching at wire speed
• Simple plug and play operation—automatic learning, negotiation, and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation (802.3ad)
• Traffic prioritization
• Transaction-based configuration with rollback
• GMRP and GMVP services
• Ethernet ports configurable for routed or switched operation
• Telecom style CLI

Management Tools

• Web-based, telecom standard CLI management interfaces
• SNMP v1/v2/v3
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms
• NETCONF
• Role-based access control

Universal Power Supply Options

• Fully integrated, dual-redundant (optional) power supplies
• Universal high voltage ranges: 88–300VDC or 85–264VAC
• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to 85°C

The RUGGEDCOM M2200 switch is a 9-port, MIL-STD fully managed, modular Ethernet switch, specifically designed to operate reliably in harsh environments. The M2200’s superior rugged hardware design, coupled with the embedded Rugged Operating System (ROS®), provides improved system reliability and advanced cybersecurity and networking features, making it ideally suited for creating secure Ethernet networks for mission-critical, real-time control applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports M2100

• Up to 9 Gigabit Ethernet ports copper and/or fiber
• 2 port modules for tremendous flexibility
• Supports multimode and single-mode fiber
• Non-blocking, store and forward switching
• Supports LC connectors for fiber, Micro-D connectors for copper

Cybersecurity Features

• Multilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Zero-Packet-Loss™ technology
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards
• 18 AWG galvanized steel enclosure

MIL-STD Ratings

• MIL-STD 901D – shock (hard mounted)
• MIL-STD 167 – vibration
• MIL-STD 461 – EMI
• MIL-STD 1399 – magnetic field (DC magnetic exposure)
• MIL-STD 810 – temperature and humidity

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) and GVRP support
• Link aggregation (802.3ad)
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)
• Industrial automation features (e.g., Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Popular low-voltage ranges: 24 VDC(10–36 VDC), 48 VDC (36–72 VDC)
• Screw or pluggable terminal blocks available
• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to +85°C

Leveraging the built-in switching and routing capabilities of the RUGGEDCOM RX1500, the RUGGEDCOM APE is a utility-grade computing platform that plugs directly into any member of the RUGGEDCOM RX1500 family and makes it possible to run third party software applications without the complications and inconveniences of procuring an external industrial PC.

RUGGEDCOM APE is available pre-installed with Microsoft Windows 7 Embedded, Linux, and CheckPoint GAiA platforms. As it is compliant to the standards of a PC, the user can choose to install and run their customized operating system as they choose.

RUGGEDCOM APE provides one Gigabit Ethernet link on the front of the unit, and another equal, but completely separated link to the backplane of the RX15xx chassis. This physical separation of ports and the special arrangement of the connections on RUGGEDCOM APE make it an ideal platform for networking and security-related applications, examples of which are security appliances, firewalls, network log and load processors, and intrusion sensors.

Through the use of a virtual machine, old software can be run on new and secure operating systems on the RUGGEDCOM APE, making it possible to extend the life of obsolete and unsupported software. All variants of RUGGEDCOM APE are available with optional conformal coating, and are qualified for operating ambient temperatures of -40º C to +70º C. It meets all the electrical specifications of the RUGGEDCOM RX15xx platform, namely IEC61850-3 and IEEE 1613 for operation under some of the harshest industrial conditions.

General Features:

• Microsoft Windows 7 Embedded
• Debian Linux
• CheckPoint GAiA

Hardware:

• Form factor: line module for the RUGGEDCOM RX1500 multi-service platform family
• CPU: Intel Atom E660T, 32-bit, 5000 MIPS at 1.3GHz, 512KB cache, Intel HT and VT-x supported
• 2x USB-2 ports
• Ethernet interfaces: 1x Gigabit RJ45 port on the front face plate, 1x Gigabit RJ45 port to the RX15xx backplane
• Video: DVI port, maximum resolution 1024x768, Intel integrated GMA500 at 400MHz.
• Memory: 2GB DDR-2
• SDD: 8GB and 16GB orderable, SATA-II
• Immunity to EMI and high voltage electrical transients
• Meets IEEE 1613 (electric utility substations)
• Meets IEC 61800-3 (variable speed drive systems)
• Meets IEC 61000-6-2 (generic industrial environment)
• 1x RJ45 Gigabit Ethernet
• 2x USB-2 type A
• 1x DVI-D
• Reset button

The RUGGEDCOM RS400 is a utility-grade, serial device server with an integrated, fully managed Ethernet switch, designed to operate reliably in electrically harsh and climatically demanding environments. Featuring an integrated 4-port serial server, a 4-port managed Ethernet switch, and an optional V.90 modem, the RS400 is able to interconnect multiple types of intelligent electronic devices (IEDs) that have different methods of communication. Using the RS400 results in fewer connectivity devices, reducing overall system costs, and also extends the useful life of existing legacy IEDs, minimizing capital expenditure for new equipment.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• Integrated Ethernet switch – up to 4 ports
• High performance and throughput Ethernet switching
• Full IEEE 802.3x compliance
• Non-blocking, store and forward switching
• 10/100BaseTX, 10BaseFL, 100BaseFX options

Serial Device Server

• Fully compliant EIA/TIA RS485, RS422, RS232 serial ports (software selectable) – DB9, RJ45, Phoenix style connectors
• Transmit serial data over an IP network
• Support for Modbus TCP, DNP 3, TIN serial protocols
• Baud rates up to 230 Kbps
• Point-to-point and multipoint modes
• Convert Modbus RTU to Modbus TCP
• Supports multiple Modbus masters

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges Meets IEEE 1613 (electric utility substations)
  Exceeds IEC 61850-3 (electric utility substations)
  Exceeds IEC 61800-3 (variable-speed drive systems)
  Exceeds IEC 61000-6-2 (generic industrial)
  Exceeds NEMA TS-2 (traffic control equipment)
• Fully independent 2kV (RMS) isolated serial ports
• 18 AWG galvanized steel enclosure

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• Integrated secure management
• Fast network fault recovery (<5 ms) with eRSTP™
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) and GVRP support
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supplies (no external adapters)
• CSA/UL 60950 safety approved -40°to +85°C

The RS900W family are wireless Ethernet switches which integrate IEEE 802.11b/g secure wireless LAN, with fully managed Ethernet switches and optional serial server functionality. With the installation of the RS900W series of wireless LAN products, a network designer will achieve the integration of wired and wireless networks. The RS900W product family can be configured as an access point, client, or bridge device.

Wireless Ethernet with integrated 8-port managed switch and 128-bit encryption.

Due to a change in regulations governing wireless testing and certification in Europe, the RS9xxW products can no longer be sold into European countries. For excellent Industrial Wireless LAN solutions that meet the latest regulations, please check out our SCALANCE W Industrial Wireless LAN portfolio.

Cyber Security Features

• WPA (Wi-Fi protected access) with TKIP for enhanced security and encryption
• WPA2/11i CCMP for robust security and 128-bit AES encryption
• IEEE 802.1X/RADIUS using EAP-PEAP for secure “enterprise class” authentication configuration
• Pre-shared key mode (PSK) for “personal” mode authentication configuration
• Multilevel user passwords
• SSH/SSL encryption (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Universal Power Supply Options

• Fully integrated power supply (no external adapters)
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Dual low-voltage DC inputs: 24 VDC (10–36 VDC) or 48 VDC (36–72 VDC)
• Terminal blocks for reliable, maintenance¬-free connections
• CSA/UL 60950 safety approved to +85°C

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable-speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial)
• Exceeds NEMA TS-2 (traffic control equipment)
• –40°C to +85°C operating temperature (no fans)
• 20 AWG galvanized steel enclosure
• DIN or panel mounting options provide secure mechanical reliability
• Hazardous location certification: Class 1 Division 2

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• MSTP (802.1Q-2005, formerly 802.1s)
• RSTP (802.1D-2004) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation (802.3ad)
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)

The RS910W family are wireless Ethernet switches which integrate IEEE 802.11b/g secure wireless LAN, with fully managed Ethernet switches and optional serial server functionality. With the installation of the RS900W series of wireless LAN products, a network designer will achieve the integration of wired and wireless networks. The RS900W product family can be configured as an access point, client, or bridge device.

Wireless Ethernet with integrated 8-port managed switch and 128-bit encryption.

Due to a change in regulations governing wireless testing and certification in Europe, the RS9xxW products can no longer be sold into European countries. For excellent Industrial Wireless LAN solutions that meet the latest regulations, please check out our SCALANCE W Industrial Wireless LAN portfolio.

Cyber Security Features

• WPA (Wi-Fi protected access) with TKIP for enhanced security and encryption
• WPA2/11i CCMP for robust security and 128-bit AES encryption
• IEEE 802.1X/RADIUS using EAP-PEAP for secure “enterprise class” authentication configuration
• Pre-shared key mode (PSK) for “personal” mode authentication configuration
• Multilevel user passwords
• SSH/SSL encryption (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Universal Power Supply Options

• Fully integrated power supply (no external adapters)
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Dual low-voltage DC inputs: 24 VDC (10–36 VDC) or 48 VDC (36–72 VDC)
• Terminal blocks for reliable, maintenance¬-free connections
• CSA/UL 60950 safety approved to +85°C

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable-speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial)
• Exceeds NEMA TS-2 (traffic control equipment)
• –40°C to +85°C operating temperature (no fans)
• 20 AWG galvanized steel enclosure
• DIN or panel mounting options provide secure mechanical reliability
• Hazardous location certification: Class 1 Division 2

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• MSTP (802.1Q-2005, formerly 802.1s)
• RSTP (802.1D-2004) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation (802.3ad)
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)

Combining Ethernet switching, wireless LAN, routing and firewall functionality in one, the RUGGEDCOM RX1400 holds its own in the most demanding industrial environments. As a cellular router, it eliminates the need for extensive communication infrastructures. In addition to providing IP40 protection, it requires no internal fans for cooling to operate reliably in an extended temperature range of -40° C to +85° C.

The RUGGEDCOM RX1400, thanks to its compact form factor and multi-function capability, offers a cost saving solution for large scale deployments by avoiding the need for multi-device solutions to achieve the needed interface, switching, routing and application hosting capabilities.

The RUGGEDCOM VPE1400 provides a virtualized environment to run a guest Linux operating system and third party applications on the RX1400, enabling intelligence at the network edge.

Virtualization allows a full Linux image (with dedicated storage media and I/O ports) to run in parallel with the RUGGEDCOM ROX II, using a Linux KVM (Kernel Virtual Machine) based solution. The KVM ensures that the guest OS and third party applications can run without impacting RUGGEDCOM RX1400 core services running on the system. The RUGGEDCOM RX1400 is an all-in-one solution for plug-and-play connectivity to MindSphere. This compact, single device solution provides the combined capabilities of data acquisition, conversion and communication with MindSphere.

Communication interfaces

• 2 SMA ports for Wireless WAN Interface (4G/3G/2G) with up to 100 Mbit/s bandwidth
• 4 x 10/100 Mbits/s ports (10/100TX)
• 2 x 1000 Mbit/s SFP ports (1000LX) for long reach fiber optic connections (up to 100 km)
• 2 Serial Ports RS232/RS422/RS485 (DB9)
• 2 R-SMA ports for Wireless LAN Interface supporting IEEE 802.11a/b/g/n with up to 100 Mbit/s bandwidth

Other interfaces

• SMA port for GPS
• RS232 console port for local management / diagnostics on the device
• Isolated built-in power input (12-24 VDC)

Rugged Rated for harsh environments

• -40 C to +85C operating temperature (no fans)
• CSA/UL 60950 safety approved to +85C

Management tools

• Web-based, SSH, CLI management interfaces
• SNMP v1/v2/v3
• Remote Syslog
• Rich set of diagnostics with logging and alarms
• Loopback diagnostic tests
• Raw and interpreted real time line traces

Software features

• Running ROX II Operating System
• Virtualization allows a full Linux image (with dedicated storage media and I/O ports) to run in parallel with the ROX II operating system.
• Enhanced security / reliability through data and control path separation
• Single file configuration automation ensures easy installation and configuration control
• Automatic rollback in the event of configuration errors
• NETCONF configuration interface supports powerful remote configuration and status features
• Port rate and Broadcast Storm Limiting
• Port configuration, status, statistics, mirroring
• Routing Protocols OSPF, BGP, RIPv1 and v2
• Virtual Router Redundancy Protocol (VRRP)
• NTP time synchronization (client and server)
• Redundancy protocols MSTP 802.1Q-2005, RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP) for network
• fault recovery
• Quality of service (802.1p) for real-time traffic

Cyber security features

• IPSEC the integrated hardware encryption engine delivers high performance IPSEC traffic without using the main processor

RUGGEDCOM REFLEX substation HMI is a purpose built solution for local and remote monitoring and controlling all aspects of substation operations. Whether you need support for users local or remote, Reflex makes information available through the following ready to deploy features:

• Single Line diagram with rich graphics editor
• Multiple protocol support
• Faceplate emulation of many IEDs
• Alarm acknowledgement and summary
• Sequence of events summary
• Graphical trending of values
• Extensive reporting facility
• Historian option to record years of information

Custom screens and applications can also be quickly developed using the RUGGEDCOM REFLEX’s advanced scripting language.

Getting your data, all of it

• RUGGEDCOM REFLEX device interface library is large, with more than 50 protocol interfaces that allow you to get to data from decades old RTUs as well as the latest 61850-based IEDs. REFLEX can also be combined with the RUGGEDOM ELAN Substation Communications Server to extend data visualization to include non-operational data and enhance reliability by partitioning the data acquisition and visualization functions.:
• With its SQL-based architecture, REFLEX goes well beyond the substation as well to incorporate enterprise information from disparate databases. Configuring the system is simple, with templating and automatic population of data lists for certain devices types.